The short answer: Contact Felipe Iglesias at [email protected] or +86 13126536955. Send a 3D STEP file plus a toleranced 2D drawing, name the material, quantity, and finish, and flag the dimensions that control function. A quote comes back with the cost drivers already visible.
Tel / WhatsApp: +86 13126536955
Languages: English, Portuguese, Spanish, French, and Chinese
Address: No. 8, Shuibian Songyuan Road, Hengli Town, Dongguan, Guangdong, China 523470
How Do You Reach the Milling Team?
The point of contact is Felipe Iglesias, the business development director, at [email protected] or +86 13126536955. There is no form to route through — an inquiry goes to a person who can read a drawing, judge manufacturability, and answer a question directly rather than promise a callback. For most buyers that single difference is worth more than a polished contact page.
Email is the better channel for a first inquiry because it lets the drawing and the question travel together. A STEP file attached to a short message — material, quantity, finish, and the two or three dimensions that matter — is a complete brief in one send. Phone is for the follow-up questions that are faster spoken than typed.
What Should a Quote Request Include?
The quote is only as accurate as the file behind it, so the brief is short but specific:
- 3D STEP file — the geometry that dictates axis count and setup plan.
- Toleranced 2D drawing, which dimensions are tight, and which can ride at general tolerance.
- Material — the alloy, not just "aluminum" or "steel."
- Quantity — prototype, low volume, or production; it changes the economics.
- Finish — anodizing, plating, powder coat, passivation, or just deburred.
The one lever that matters most: flag only the dimensions that control function. Every tight dimension forces slower cuts and more inspection, so over-tolerancing buys cost without buying function, and a clean callout is the fastest route to an accurate price.
Accepted drawing formats are STEP, IGES, STP, DWG, DXF, PDF, and JPG. A 3D STEP file plus a toleranced 2D PDF quotes fastest and most accurately, because the 3D file carries the geometry while the 2D file carries the tolerance callouts. A photo or a hand sketch is a starting point, but it produces an estimate rather than a firm price — the model is what turns a guess into a number.
Where Is the Factory Located?
The factory is at No. 8, Shuibian Songyuan Road, Hengli Town, Dongguan, Guangdong, China 523470. It sits in the Pearl River Delta, the densest machining region in China, where raw material, tooling, and finishing partners are all within the same industrial cluster. For you that means material arrives faster and parts leave cheaper, because the supply chain and the export ports are both close by.
Get directions to our Dongguan plant
The location is practical rather than decorative: Dongguan is near Shenzhen and Hong Kong, so freight for export shipments starts from a short haul. If a visit is ever useful, the factory can be reached from either city without a long detour.
What Languages Does the Sales Team Speak?
The sales team communicates in English, Portuguese, Spanish, French, and Chinese, and Japanese, with overseas after-sales partners in Japan, the United Kingdom, Canada, and Australia. English covers most buyer conversations; Portuguese and Spanish are native-level for the contact person, which removes a layer of friction for buyers from those markets. Technical drawings, of course, cross any language barrier — a STEP file and a toleranced print need no translation.
What Happens After You Send a Drawing?
The drawing is reviewed for manufacturability first, not price. The geometry dictates the axis count and setup plan, the material dictates feed and speed, and the tolerances dictate inspection. A quote then returns with the cost drivers visible, which features are expensive, which finishes stretch the schedule, and where a small design change would save money.
If the design is still early, that review is the real value. A DFM pass names the features driving cost and suggests changes that often pay for themselves before the first chip falls. It is also the cleanest way to judge engineering depth: a specific, actionable review with reasons beats a blind quote every time.
How Quickly Will You Hear Back?
An inquiry is answered fast — the target is a first response within 30 minutes during business hours, and simple urgent parts can ship in as little as one day. Beyond that, lead time follows complexity rather than quantity: simple parts with few process steps land around three days, standard parts around seven, and complex parts with surface finishing can reach thirty days. The honest way to read those numbers is as a geometry signal — a part with ten to twenty process steps, or one that leaves the floor for anodizing or plating, sits at the long end by nature, not by negotiation.
The fastest route to a firm date is the same as the fastest route to a firm price: a clean 3D STEP file with tolerances only on the features that matter. A written description of a part produces a range; a model produces a date.
What Support Follows the Order?
The relationship does not end at shipment. Overseas after-sales support runs through partners in Japan, the United Kingdom, Canada, and Australia, so a question about a delivered batch is handled in-region rather than across a time zone. The same contact person who quoted the job stays on it through delivery, which keeps the conversation from restarting with a stranger on the next email.
If a batch ever arrives short of spec, the traceability system makes the failure quick to pin down — the raw material lot, the machine, the operator, and the inspection record are all linked. That matters little when everything goes right and a great deal when it does not.
How Is Intellectual Property Handled?
Designs are treated as confidential by default. Drawings are never shared without written permission, and an NDA is signed and returned if you provide one. On the physical side, sensitive paper files are stored in a locked space; on the digital side, files sit on encrypted storage and are used and disposed of responsibly. For you sending a proprietary part design, this is the difference between a supplier and a partner, and it should be stated plainly, not buried in fine print.
How Should a First Order Begin?
Most new relationships start with a first article rather than a full production run. A single piece — there is no minimum order — proves the process, the tolerance, and the finish on your bench before any volume is committed. The first article also ships with a dimensional report from the CMM, so you are approving a measured part rather than a photographed one.
Once the first article is signed off, the process is locked: the program, the fixtures, the cutting parameters, and the inspection plan are all documented, so the production batch repeats what the sample demonstrated. That is the entire point of a first article — it turns a promise into a reference part.
Start With a Drawing
Email your STEP file and toleranced drawing for a quote, or ask a question before you send anything. No minimum order.
Email [email protected] Call +86 13126536955Frequently Asked Questions
Who do I contact for a quote?
Contact Felipe Iglesias, the business development director, at [email protected] or +86 13126536955. Inquiries go straight to a person who can read a drawing and route it, rather than into a generic contact form.
What information should I include in a quote request?
Send a 3D STEP file, a toleranced 2D drawing, the material, the quantity, and any finish requirement, and flag the two or three dimensions that control function. That single step produces a faster, more accurate quote than a written description.
Where is the factory located?
The factory is at No. 8, Shuibian Songyuan Road, Hengli Town, Dongguan, Guangdong, China 523470. It sits in the Pearl River Delta, close to Shenzhen and Hong Kong, which shortens export freight.
What languages can the team communicate in?
In short, The sales team communicates in English, Portuguese, Spanish, French, and Chinese, and Japanese, with overseas after-sales partners in Japan, the United Kingdom, Canada, and Australia. English covers most buyer conversations, and technical drawings cross any language barrier.
What happens after I send my drawing?
The drawing is reviewed for manufacturability, the geometry dictates the axis count and setup plan, and a quote returns with the cost drivers visible. If the design is early, a DFM review names the features driving cost before you commit.
Will my design be kept confidential?
Yes. Drawings are never shared without written permission, an NDA is signed and returned if you provide one, sensitive paper files are stored in a locked space, and digital files sit on encrypted storage with responsible disposal.
Standards referenced on this page
- ASTM B211/B211M-19 — Standard Specification for Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
- ISO 9001 — Quality management systems — Requirements
- ASTM E8/E8M-21 — Standard Test Methods for Tension Testing of Metallic Materials
